EPM.K Membrane Filter Cartridges (Liquid Filtration)

Technofilter - technologies of microfiltration of liquids and gases
   Русский English

ABOUT PRODUCTION APPLICATION FEEDBACK NEW PRODUCTION QUALITY SERVICE





PRODUCTION:


Filtering discs

Filtering capsules

Cartrige filtering elements

Membrane Filter Cartridges

EPM.K Membrane Filter Cartridges (Liquid Filtration)


EPM.K+ Filter Cartridges (Liquid Filtration)
EPM.PS Filter Cartridges (Liquid Filtration)
EPM.F4 Membrane Filter Cartridges (Air and Gas Filtration)

Depth Filter Cartridges
Sorptive Filter Cartridges
Adapter types


Holders of filters

Filtration installations

 

 

 

EPM.K Membrane Filter Cartridges (Liquid Filtration)


Description

EPM.K (ЭПМ.К) cartridge membrane elements are manufactured by a proprietary technology of Technofilter and are close analogues of Pall's Ultipor and Nylaflo elements and Sartorius's Sartolon element.

Material of Constructions

 

Membrane

Nylon 6

Support, Drainage and End Caps

Polypropylene

Core and Cage

Polypropylene

O-rings

Silicone*

 

*optionally Viton or fluorine rubber

Main applications

  • In medicine and biopharmaceutics: for removal of mechanical contaminants, clarification and sterilization of parenteral and ophthalmological solutions, antibiotics, cultural, bacterial and fermentative media, blood protein preparations, serum, biological preparations and vaccines, vitamin and galena preparations, water for injections.
  • In beverage industry: for defertilization and cold sterilization of wine and beer, clarification of distillery products, polishing filtration of vodkas, final filtration of non-alcoholic beverages, mineral and bottled water, water for product formulations and rinsing water.
  • In microelectronics, radio engineering and biochemistry: for final filtration of deionized water, photoresists, solvents and other media that are compatible with material of construction.
  • In other industries: for fine filtration of liquid media from particles 0.1 μm or more in size.

 

Main size pore combinations of EPM.К elements

One-layer filters

Two-layer filters

Pore size, μm

Order code

Pore size, μm

Order code

    0.45+0.10
045/010

0.20

020

0.20+0.20

020/020

0.45

045

0.45+0.20

045/020

0.65
065
0.65+0.45 065/045
0.80
080
0.80+0.65
080/065
1.0
100
3.0+0.80
300/080
3.0
300
3.0+1.0
300/100

 

Flow rate of EPМ.К elements as a function of pressure using distilled water

 

Technical and operating characteristics (for 250 mm high elements)

Element designation

EPM.К membrane cartridge element

Average pore size, μm

0.1

0.2

0.45

0.65

0.8

1.0

1.2

3.0

Minimum air bubble point, MPa

0.50

0.35

0.24

0.17

0.12

0.10

0.08

0.06

Maximum operating pressure, MPa

0.5

Maximum differential pressure, MPa

0.5 at 20°C; 0.20 at 80°C

Maximum counterpressure, MPa

0.15 at 20°C

Maximum operating temperature, °C

80

Effective filter area, m2

0.85, one-layer; 0.64, two-layer

pH range

3-14

Number of sterilization cycles (by autoclaving) at P=0.1 MPa / t=121°±1°C for 30-45 min, no less than

20

 

Capacity for retention of bacteria

Sterilizing capacity of EPМ.К has been confirmed with respect to test microorganism Brevundimonas Diminuta, stain PCI 818 (Pseudomonas Diminuta ATCC 19146, DSM 1635). The level of microbiological load on the filter element complies with requirements of the guideline of Association of producers of medical industry on microbiological examination of filters for sterilization of liquids. EPМ.К has been checked for retention of bacteria after 10 cycles of autoclaving at 121°C in the Pharmacopoeia mode.

Ordering Information

 

EPМ.К

045/020

D1

250

М

Grade


Removal Rating

Adapter types

Nominal Length

Application

         
 

0.2 μm

0.45 μm

0.65 μm

0.80 μm

1.0 μm

3.0 μm

A -  Dead-end cartridge, 44.5 mm adapter, disc end cap,code: 27*, 3**, 0***

А1 -  Dead-end cartridge, 44.5 mm adapter, fin end code: 26*(provisionally), 5***

А4 -  Dead-end cartridge, long 44.5 mm adapter, triple bayonet base at the bottom, fin end at the top, code: 28*

D1 -  Dead-end cartridge,  56 mm adapter double bayonet base at the bottom, fin end at the top, code: 25*, 7**, 7***

D -  Dead-end cartridge, 56 mm adapter, double bayonet base at the bottom, disc end cap at the top

В - In-line cartridge, no adapter, code: 21*

В (SL) - In-line cartridge, no adapter, O-rings for Slime line filter holders 

100 = 100 mm

150 = 150 mm

250 = 250 mm (10")

500 = 500 mm (20")

750 = 750 mm (30")

1000 = 1000 mm 40"

М = medical and biopharmaceutical.

P = Food industry

E= Electronic industry

 

* Sartorius cartridge code; ** Pall cartridge code; *** Millipore cartridge code  

 



   

 

 


© 1992—2013
All rights reserved
NPP Technofilter

...

Contact information


Russia, Vladimir, Bolshaya Nijegorodskaya st., 77
Tel./Fax: +7 (4922) 47-47-41
E-mail: technofilter@mail.ru
How to get


Creation and promotion of site —
Internet agency Index Design


Technofilter - Index SiteMap Contact us