Cartridge membrane filter elements, membrane filter elements, filter elements

Technofilter - technologies of microfiltration of liquids and gases
   Русский English

ABOUT PRODUCTION APPLICATION FEEDBACK NEW PRODUCTION QUALITY SERVICE





PRODUCTION:


Filtering discs

Filtering capsules

Cartrige filtering elements

Membrane Filter Cartridges

EPM.K Membrane Filter Cartridges (Liquid Filtration)
EPM.K+ Filter Cartridges (Liquid Filtration)


EPM.PS Filter Cartridges (Liquid Filtration)
EPM.F4 Membrane Filter Cartridges (Air and Gas Filtration)

Depth Filter Cartridges
Sorptive Filter Cartridges
Adapter types


Holders of filters

Filtration installations

 

 

 


Description

EPМ.К+ membrane filter element incorporating a polyamide membrane with modified charge (Z potential) is intended for removal of endotoxins and viruses from pharmaceutical-grade water systems.

Material of Constructions

 

 Membrane

Nylon 6 (Z potential)

 Support, Drainage and End Caps

Polypropylene

 Core and Cage

Polypropylene

 O-rings

Silicone

 

Main applications
  • Prefiltration of injection and infusion solutions in combination with pyrogenicity control
  • Sterilizing filtration of poorly seminated solutions
  • Removal of mycoplasmas, bacterial endotoxins (pyrogens) and viruses from aqueous solutions
  • Continuous sterile filtration in water treatment systems

Capacity for retention of bacteria

Sterilizing capacity of EPM.К+ has been confirmed with respect to test microorganism Brevundimonas Diminuta, stain PCI 818 (Pseudomonas Diminuta ATCC 19146, DSM 1635). The level of microbiological load on the filter element complies with requirements of the guideline of Association of producers of medical industry on microbiological examination of filters for sterilization of liquids. EPМ.К+ has been checked for retention of bacteria after 10 cycles of autoclaving at 121°C in the Pharmacopoeia mode.

Main size pore combinations of EPМ.К+ elements

One-layer filters

Two-layer filters

Pore size, μm

Order code

Pore size, μm

Order code

0.20

020

0.20+0.20

020/020

0.45

045

0.45+0.20

045/020

Technical and operating characteristics (for 250 mm high elements)

Element designation

EPМ.К membrane cartridge element

 Average pore size, μm

0.20

0.45

 Minimum air bubble point, MPa

0.35

0.24

 Maximum operating pressure, MPa

0.5

 Maximum differential pressure, MPa

0.5 at 20°C; 0.25 at 80°C

 Maximum counterpressure, MPa

0.20 at 20°C, 0.10 at 60°C

 Maximum operating temperature, °C

80

 Effective filter area, m2

0.85/0.64

 pH range

3-14

 Number of sterilization cycles (by autoclaving) at P=0.11 MPa / t=121°±1°C for 30-45 min, no less than

20

 

Ordering Information

EPМ.К

045/020+

D1

500

М

Grade


Removal Rating

Adapter types

Nominal Length

Application

         
 

0.2 μm

0.45 μm


A -  Dead-end cartridge, 44.5 mm adapter, disc end cap,code: 27*, 3**, 0***

А1 -  Dead-end cartridge, 44.5 mm adapter, fin end code: 26*(provisionally), 5***

А4 -  Dead-end cartridge, long 44.5 mm adapter, triple bayonet base at the bottom, fin end at the top, code: 28*

 D1 -  Dead-end cartridge,  56 mm adapter double bayonet base at the bottom, fin end at the top, code: 25*, 7**, 7***

D -  Dead-end cartridge, 56 mm adapter, double bayonet base at the bottom, disc end cap at the top

 В - In-line cartridge, no adapter, code: 21*

 В (SL) - In-line cartridge, no adapter, O-rings for Slime line filter holders 

100 = 100 mm

150 = 150 mm

250 = 250 mm (10 in.)

500 = 500 mm (20 in.)

750 = 750 mm (30 in.)

1000 = 1000 mm(40 in.)

М = medical and biopharmaceutical


 

* Sartorius cartridge code; ** Pall cartridge code; *** Millipore cartridge code 

 



   

 

 


© 1992—2013
All rights reserved
NPP Technofilter

...

Contact information


Russia, Vladimir, Bolshaya Nijegorodskaya st., 77
Tel./Fax: +7 (4922) 47-47-41
E-mail: technofilter@mail.ru
How to get


Creation and promotion of site —
Internet agency Index Design


Technofilter - Index SiteMap Contact us